OUR VINTAGE OMEGA WATCHES ...PAGE 4

• View Purchase Details
  
• Contact Us
  
• Favourite Links
•                                                      WE BUY OLD POCKET AND WRIST WATCHES ANY CONDITION

WE STOCK MANY WRIST AND POCKET WATCH PARTS, INCLUDING 1000'S OF GENUINE OMEGA PARTS, CROWNS, STEMS, STAFFS, ETC... PLEASE E-MAIL FOR PRICES AND REPAIR QUOTATIONS.

LARGE, DETAILED SCANS ARE AVAILABLE BY CLICKING ON THE IMAGE OF YOUR CHOICE

changes last made Aug-27, 2010

 


WE BUY OLD POCKET AND WRIST WATCHES ANY CONDITION

tid bit of info for you :-)

Ever wonder what a cap jewel is or an "Inca bloc shock system is all about?"

A cap jewel you will find on both sides of the balance wheel staff (pivot)  and this piece (cap jewel) is under a very small spring that closes down on the jewel but lets it float a little so if G-d forbid you drop your watch the balance staff that fits right underneath it will move up and down a fraction so it will not snap as the cap jewel is held in by the small inco bloc spring as mentioned just before. You have a small friction jewel just under the cap jewel and this small friction jewel has a hole in the center and this is where the balance staff goes into, to keep the balance straight and the cap jewel is flat on the balance staff side and rounded on top so the Inca bloc spring keeps a it snug in place but will let it move a fraction of a mm to give the staff protein from falls. Without an Inca bloc system on both plates of the balance if the watch is dropped there is no give and the balance will snap in half and you are looking at a major repair job.

 

 

	OMEGA SEAMASTER STAINLESS STEEL AND SERVICIED  1965  STOCK NUMBER # OMEGA8830-------I have for sale a fully serviced Seamaster stainless steel Omega wrist watch and it is a manual wind piece. This is a stainless steel Omega with the Sea monster on the back and no personal engravings at all. The the total length of this Omega Seamaster is 40mm and wide not including the Omega signed crown it is 35mm wide. The case is a screw in back and the case reference number is 135.011. The dial is excellent and the hands are original as well the acrylic crystal is perfect not a flaw to be found. The movement is well serviced and it is a manual wind Omega caliber 601 with 17 extra fine , clean and inspected ruby jewels. The serial number for this Omega wrist watch movement is 22,346,264 and again from the year 1965 at the Omega Swiss factories did this Omega come from.  The band is 18mm in width crisp indeed. This is a classic design from the 1965 era and remember all time pieces come with a no questions asked 1 FULL year warranty parts and labour.   775.00 USD
	OMEGA STAINLESS STEEL BUMPER AUTOMATIC GOLD RIM CRYSTAL  FULLY SERVICED  STOCK NUMBER # OMEGA210------- I have for sale a fully serviced Omega stainless steel bumper automatic wrist watch and the case is in impeccable condition. This case is 43mm long and wide not including the crown it is 35mm . This Omega signed case reference number is C25775SC which is the most desirable case with the beefy large bezel. The dial is amazing and the hands are original to this Omega. The movement is a bumper automatic and it has been carefully and fully serviced with never a short cut taken. This is the famous work horse caliber 351 with 17 clean and inspected ruby jewels. The serial number for this bumper automatic Omega movement is 13,071,488 and this serial number tells me it is from the year 1952 and runs like day one out of the Swiss Omega factories. The band is leather never worn it is perfect at 18 mm in width. 775.00 USD
	OMEGA SQUARE GOLD FILLED AND SERVICED 1953  STOCK NUMBER # OMEGA6625------- This This piece has the smell of a 5,000 dollar Omega but only you know the true price tag!. The case is gold filled and signed Omega. The gold filled bracelet is not signed but the patina is a perfect match and gives you that "boardroom power look". The case across not including the crown is 28mm and with the lug to lug measurement it is 38mm so the size is a nice easy fit. The case serial number is 119,620. The movement is serviced and it is a manual wind Omega caliber 302 with 17 clean ruby jewels. The serial number for this movement is 16,990,816 and this number tells me the year of production and it is 1958. The dial and hands are all original and the crystal is glass. A really nice clean elegant all original piece and again and easy price attached to it. The back is a snap in with no personal engravings and there is a filled dot at the bottom corner as the last scan shows you but not earth shattering at all. 775.00 USD
	OMEGA "CONSTELLATION" CHRONOMETER AND SERVICED ALL STAINLESS STEEL 1970  STOCK NUMBER # OMEGA49000-------- Right off the bat I will tell you the dial is not perfect but not earth shattering either but it must be said out front. The case and bracelet are stainless steel with no personal engravings at all. The head of this Constellation Omega is 40mm and wide not including the Constellation Omega crown it is 35mm. The crystal has the Omega logo embedded into it at the dead center just above the sweep hand. the hands are original indeed, The bracelet is signed Omega and there are 20 links and 2 end pieces. The movement is a chronometer Omega caliber 1001 with 20 clean ruby jewels. The serial number for this Omega chronometer is 30,152,986 and this serial number tells me this Omega was produced at the Swiss factory in the year 1970. I have cleaned and serviced this Constellation properly so in fact it keeps perfect time as a chronometer should.  Some people prefer leather bands so I will included one no extra charge if you so desire. This is a big size and has some nice weight to it. All original and ready to go.   1200.00 USD
	OMEGA STAINLESS STEEL LARGE EXTRA CLEAN WRIST WATCH 1954  STOCK NUMBER # OMEGA9150-------- This is a large dial stainless steel Omega wrist watch and it is very clean indeed. The case lug to lug is 45mm loooong and without the signed crown it is 37mm wide so indeed it is a good size. The dial is extra clean and the hands are original to this Omega. The case is a snap in back with no personal engravings. The reference number for this steel cased Omega is 2750-2. The movement is almost new old stock and runs as such as it has been just completed with the best service possible by me:-). This is a manual wind caliber 266 with 17 cleaned jewels and the serial number for this Omega is 14,105,332 which tells me it was produced at the Swiss Omega factories in the year 1954 and it looks as though it was freshly produced and again it is an excellent time keeper. The band is 18mm in width never worn mint. A great larger size Omega and serviced with a 1 year warranty like all our time pieces!   750.00 USD
	OMEGA "CENTURY" STEEL CASE AND SERVICED 1952  STOCK NUMBER # OMEGA6310-------- Here is a freshly serviced time piece from the Omega Swiss factories. This is a bigger than avg steel case. This case is signed Omega and it is 42mm long and without the signed crown it is 35mm wide. The dial is extra clean and the hands are original to this Omega manual wind wrist watch, The case reference number is 2496-9 and there are no personal engravings on this piece. The movement is a modern 30T2 model and it is a # 283 with 17 jewels. The serial number for the excellent running movement is 13,406,893 and this tells me it was produced in the year 1952. The band is 18mm in width and never worn genuine leather. I may want to add the back of this case is a snap in and it is a good time keeper but then again it's an Omega and expect nothing less!.   775.00 USD
	OMEGA "SEAMASTER" LARGE STEEL CASE AND SERVICED 1952  STOCK NUMBER # OMEGA5116--------  Just off my bench, timed and here you have a freshly serviced large dial and steel cased Omega wrist watch. This is a signed case and it is 44mm long and without the crown it is 36mm wide. The case has no personal engravings on the steel screw in back and it is rather smooth to the tough. The case reference number s 2639-4 which is correct for this dial and movement. The movement is a manual wind caliber 266 with 17 cleaned jewels. The serial number for this Omega gem is 13,577,324 and this tells me this large steel cased Omega was produced at the Omega Swiss factories in the year 1952. The band is 18mm in width never worn not a bend. This is a beauty and truly harder to find these extra large steel cases and in such condition!.   775.00 USD
	OMEGA 18 KARAT SOLID GOLD LADIES LARGE SIZE  1960  STOCK NUMBER # OMEGA7933------- This is not the typical ladies size wrist watch. The case is indeed fit for a special lady but it is a large size. Across this case is 28mm and from lug to lug it is 34mm long. As I said it is a great size and the case is 18 karat gold and not flimsy. The dial is original and in great original condition. the case is a snap in back with no personal engravings at all. The case reference number is 111-035 and hallmarked on the inside of the case as the scan shows you clearly. The movement is an Omega manual wind caliber 620 with 17 jewels and serviced to factory specs by myself. The serial number for this 18 karat gold ladies Omega is 20,547,088. The year of production is 1960 and Swiss made at the Omega factory. The leather band is new never worn and it is 14mm in width and compliments this piece to no end.   1550.00 USD

                                                             WE BUY OLD POCKET AND WRIST WATCHES ANY CONDITION

CONTINUE TO PAGE 5  Pg. 6   Pg. 7

GO BACK TO PAGE 1  Pg. 2  Pg. 3

Other DARLOR WATCH pages:

POCKET WATCHES      WRIST WATCHES $75.00-175.00

WRIST WATCHES $200.00-275.00      WRIST WATCHES $300.00-375.00

WRIST WATCHES $400.00-575.00      WRIST WATCHES $600.00 & OVER       OUR ROLEX WATCHES

VINTAGE WATCHES FOR THE LADIES!      DARLOR JEWELRY - NEW & VINTAGE

This page has been visited times since April 19, 2000.