
|
BOY
SCOUT JAMBOREE MOVING ARM POCKET WATCH AND JUST SERVICED 1951
STOCK NUMBER SCOUT100-------When condition counts for everything then this
is the piece for you. All original only the crystal has been changed. This is an
original case , movement and papyrus dial. Even the Boy scout hands waves
up and down as it is the second hand for this Smith's pocket watch and made at
the Great Britain Factories in 1951. This chromed nickel case is 53mm across and
the hands are original to wind this manual wind Jamboree Boy's Scout pocket
watch you simply turn the crown. Now for something different, to changes the
time you push the crown in not out and turn the crown while keeping it down and
the hands will move. There are no jewels as this is a pin lever movement as all
early character watches were produced this way, Smith's also made instruments
for airplanes, car clocks and novelty item such as this. I can also tell you
they made Automobile clusters for Triumph and M.G.B as well as many other cars
and they STINK indeed, We had to re wire our 1976 TR-6 as Smith's should have
stayed with airplane clocks and such fine pieces like this pocket watch. As I
write down this description it is sitting right next to me ticking up a storm
and the Boy Scout hand indeed is going up and down. Remember pin lever pocket
and wrist watches are not great time keepers rather they are ok but this piece
is extra extra fine in all over condition and ultra cool for sure!
350.00 USD
 |

|
UNION
PACIFIC RAILWAY CHARACTER POCKET WATCH WELL SERVICED ONE OF A KIND 1940
STOCK NUMBER # UNION700-------First I have ever seen and with an
excellent papyrus original dial depicting a porter carrying luggage to I assume
the train. The case is gold plate flash and quite clean at 52mm across. This is
a stem wind and stem set piece with original hands and a new acrylic crystal.
This is a movement made by Westcox here in Canada from Peterborough Ontario (2
hours from where I live). I have perfectly cleaned this brass full plate
movement and as the scan shows you this is a super clean vintage movement from
the year 1940.
600.00 USD
 |
|
MIKE
TYSON "THE CHAMP" CHROMED PERFECT CASE POCKET WATCH WATCH 1987
STOCK NUMBER # MT1-4------The champ!!!!!!! pocket watch "Mike Tyson" in a
chromed case and made in the USA and the all over condition is 90% or better.
This is a perfect laminated paper dial and signed on the bottom 5/21/87. The
movement is made in the USA once again and it is a pin lever movement and works
quite well for sure. Across this case is 51mm. This is a stem wind and a stem
set piece. A great novel piece of American Boxing collectible that has a
function and can be worn everyday. Produced in the year 1987 ;-)
400.00 USD

|


|
BABE RUTH ORIGINAL FIRST POCKET WATCH PRODUCED FOR BABE RUTH AND SERVICED !!!!
1939
STOCK NUMBER #BABE700------I have for sale a first generation genuine Babe
Ruth pocket watch serviced properly and all original less a new crystal. This is
an American made pocket watch by the Ingraham Watch Factory in Bristol
Connecticut. The case is chromed and quite clean. Across this case is 53mm.
There are no engravings on this case. The dial is factory original with a bit of
nice patina. Clean an oiled properly is this stem wind and stem set model.
Produced in the year 1939 and it's a "grand slam" piece! (corny I know but I
just had to say it lol) 650.00 USD

|


|
BASEBALL 3-D"
SWINGING BAT" MANUAL WIND PIN LEVER CHARACTER WATCH 1955
STOCK NUMBER #BABE450------This is it!!! One of the most sought after character watches! Babe Ruth from
1948 by the Swiss company "Exact Time". This is a chromed case and from lug to
lug it is 45mm long and wide less the crown it is 35mm. The case is a snap in
with no personal engravings at all. The dial as you can see is factory original
not a repro nor a fake left in genuine factory condition I will also mentioned I
cleaned the case but not polished not altered it is factory original as well! I did
relume the hands and they are bright at night. The movement is an "Exact Time"
Swiss made piece with one jewel and it is a pin lever escapement original to
this Babe Ruth dial hands and case. The band is
16mm in width. I have cleaned this piece with lol too much T.L.C and it was just
wonderful to bring it back to perfect health :-)
550.00 USD

|

|
MICKEY MOUSE CHARACTER WRIST WATCH JUST SERVICED CHROMED CASE 1964
SOLD ;-)
|
|
FOOTBALL
CHARACTER WATCH WITH MOVING SECOND HAND FOOTBALL WELL SERVICED 1957
STOCK NUMBER #FOOTBALL70------A fun piece is this Football animated boy's
size. The Football acts as a second hand and goes back and forth each and every
second really neat! This is a chromed case with a plastic crystal. From lug to
lug this case is 37mm long and wide not including the chromed crown it is 30mm.
The movement is a pin lever and just cleaned the proper way. The band is leather
new never worn at 14.mm wide. The over all condition is really clean and
keeps nice time. Circa for this Swiss made piece is 1957
250.00 USD
|


|
BASEBALL 3-D"
SWINGING BAT" MANUAL WIND PIN LEVER CHARACTER WATCH 1955
STOCK NUMBER #BASEBALL------A great watch with a "3-D" Baseball player. When
you move the watch the bat appears to swings as the scans show you some of the
positions of the bat. This is a base metal gold flashed top with Capitan knot
lugs and the back is signed "Aluminium. from lug to lug this piece is 40mm long
and wide less the crown it is 33mm. The hands are original and the crystal is
acrylic and perfect. This is a pin lever 1 jewel movement and manual wind. It
keeps nice time and just a fun piece to wear. The band is Pig skin and
signed "Apollo Made in England" and it is 14mm in width.
300.00 USD
|
|
CLOWN CHARACTER
WATCH FROM THE "MUROS" SWISS FACTORY WITH "BOBBLING" HEAD AND WELL SERVCIED 1949
STOCK NUMBER #CLOWN100------This is a fun timepiece indeed as the head at
the bottom bobbles back and forth per second. It is a pin lever movement and has
been serviced and is Swiss made. The case is chromed and in nice condition with
a snap in back and no personal engravings. This is a low jewel movement as
mentioned and keeps nice time as it has been cleaned and serviced properly. The
total length of this Swiss made bobble head clown watch case is 41mm and across
less the crown it is 33mm. The dial is paper and totally original never touched
as well as the hands but I did change the crystal. The band is a high grade
leather piece with a deployment buckle. A novelty indeed with a function. Made
from the Muros Swiss watch factory as indicated on top of the paper original
dial.
300.00 USD
|
|
MICKEY MOUSE (INGERSOLL FACTORY) BEAUTIFUL
ORIGINAL CONDITION 1947
STOCK NUMBER #MM80------Here's Mickey Mouse again. This is a fully
serviced 1947 Mickey Mouse manual wind wrist watch and it is from the Ingersoll
factory in Connecticut USA. This is a 2 piece snap in back chromed case and from
lug to lug this case is 38mm long and wide less the crown it is 27mm wide.
Everything is original less the Pig skin band. The dial is excellent and even
the crystal has " Yellowed" over the years but buffed out and nearly perfect.
The dial is spotless and the hands are Mickey hands for sure ;-)
SOLD :-)
|
|
HOWDY DOODY TIME CHARACTER WATCH ALL ORIGINAL
AND CLEANED 1954
STOCK NUMBER #HOWDY------This is a boy's size, in other word not to big as
this chromed case is only 36mm long and wide less the crown it is 25mm. The
dial, hands, case and movement are all factory original and the movement has
been serviced for sure. This is a pin lever movement so it runs well but don't
expect a perfect time keeper, as it has been serviced it is acceptable time
keeping. The band is original hard to believe but true and not dried out never
worn. Made in the USA at the Ingraham watch and clock factory in Connecticut
in the year 1954. A really cool piece indeed.
200.00 USD
|
|
MICKEY MOUSE
CHROMED FLUTED CASE ALL ORIGINAL INGERSOLL 1949
Hello Darryl.
My watch arrived a few minutes ago and I am very, very pleased with it.
Excellent condition, serviced and guaranteed. So much better than
risking it from Fleabay.
Regards
Chris
|
|
DICK TRACY
CHARACTER WATCH ALL ORIGINAL FACTORY DIAL
STOCK NUMBER #DT------Made by the New Haven watch and clock company in
Connecticut USA. This is a true Dick Tracy 19355wrist watch and in stunning all
over condition. The crystal is original and has "yellowed" over the years but in
such fine form. The dial is factory original never touched nor altered. From lug
to lug this chromed snap in back two piece case is just shy of 40mm and across
less the large original crown it is 28mm. This is a pin lever movement and keeps
ok time not perfect , as you all know by now pin levers were never accurate but
acceptable time keepers. The band is 16mm in width never worn.
SOLD ;-) |

|
DONALD DUCK
CHARACTER WATCH GOLD FILLED CASE AND SERVICED QUAAAAAAKKKKKKK!!!!!!
STOCK NUMBER #DONALD DD80------A character watch from 1945 with a perfect
crystal all these years later not a scratch. This is a Donald Duck original character watch and it is made
by the US time company. This movement is a pin lever
and indeed it is cleaned to perfection like all our pieces you
may see. The dial is (and quote me please) 95 % perfect and the case well you
can see by the scan how clean it truly is. All original and it is 38mm long and
26mm wide. The leather band is extra clean and never worn at all. A
stunning American comic hero in fully serviced condition.
SOLD ;-) |

|
COWGIRL CHARACTER
WRIST WATCH WITH "MOVING GUN" 1952
STOCK NUMBER #COWBOY------I have for sale a fully cleaned and serviced
genuine "Cowboy" watch and it is all factory original less the band. The case is
chromed and from lug to lug it is 40mm and across not including the crown it is
33mm. The dial is factory original and never altered nor touched yup. The gun at
the bottom "moves" up and down with each second so it is an animated time piece.
This is a pin lever movement , Swiss made from the Muros factory from the year
1952. The back of the case is a snap in and chromed with no personal engravings
at all. The band is 16 mm in width never worn. Pin lever movements never kept
perfect time but they are for sure a lot of fun to wear.
SOLD ;-) |

|
COWBOY CHARACTER
WRIST WATCH WITH "MOVING GUN" 1952
STOCK NUMBER #COWBOY------I use the same wording as above as these are the
exact same pieces (Cowboy and cowgirl) just the dials are different. I
have for sale a fully cleaned and serviced
genuine "Cowboy" watch and it is all factory original less the band. The case is
chromed and from lug to lug it is 40mm and across not including the crown it is
33mm. The dial is factory original and never altered nor touched yup. The gun at
the bottom "moves" up and down with each second so it is an animated time piece.
This is a pin lever movement , Swiss made from the Muros factory from the year
1952. The back of the case is a snap in and chromed with no personal engravings
at all. The band is 16 mm in width never worn. Pin lever movements never kept
perfect time but they are for sure a lot of fun to wear.
275.00 USD
|

|
DONALD DUCK
CHARACTER WATCH AND SERVICED QUAAAAAAKKKKKKK!!!!!!
STOCK NUMBER #DONALD DUCK400------A character watch from 1948 with a perfect
crystal all these years later not a scratch. This is a Donald Duck original character watch and it is made
by the Ingersoll company in Connecticut USA. This movement is a pin lever
and indeed it is cleaned to perfection like all our pieces you
may see. The dial is (and quote me please) 90% perfect and the case well you
can see by the scan how clean it truly is. All original and it is 40mm long and
29mm wide. The steel stretch band is extra clean and never worn at all. A
stunning American comic watch in fully serviced condition.
SOLD ;-) |
|
PINOCCHIO
CHARACTER WRIST WATCH MADE IN THE USA AND SERVICED
STOCK NUMBER #PINOCCHIO100------I have for sale a serviced US time Pinocchio
wrist watch and it is all original indeed. The case is an all stainless steel
snap in back and the front is chromium and nearly perfect. The crystal is
excellent and the dial is original and extra crisp. The case is 40mm long and
wide not including the crown it is 30mm wide. They never were the best time
keepers but this is a decent piece indeed like all our character watches on this
page. This is a pin lever movement and it has been serviced, cleaned and oiled
properly. The era for this wrist watch is 1948. The band is 18mm in width never
worn not a bend :-)
250.00 USD
|

|
DONALD DUCK
CHARACTER WATCH AND SERVICED QUAAAAAAKKKKKKK!!!!!!
STOCK NUMBER #DONALD DUCK400------A character watch from 1948 with a perfect
crystal all these years later not a scratch. This is a Donald Duck original character watch and it is made
by the Ingersoll company in Connecticut. This movement is a pin lever
and indeed it is cleaned to perfection like all our pieces you
may see. The dial is (and quote me please) 90% perfect and the case well you
can see by the scan how clean it truly is. All original and it is 38mm long and
26mm wide. The leather band is extra clean and never worn at all. A
stunning American comic hero in fully serviced condition.
SOLD ;-)
|
|
DALE EVANS
AND SERVICED ALL ORIGINAL
STOCK NUMBER #DALE1000------1949 is the year this "Dale Evans"" was produced at the Ingraham factories in the USA, Bristol Connecticut
to be exact. This is a clean clean original dial and the case is gold filled and it really is clean. The movement as you know is
pin lever and they were never good time keepers but they run forever. I have
just cleaned this movement so no worries here at all. The case is 40mm long and
without the original large crown it is 22mm wide. If your a character watch buff
then you know they are really disappearing quickly and with clean dials? even
faster. On a closing not I found a new old stock western saddle watch band so it
really is a complete piece!
250.00 USD
|
|
LIL ORPHAN ANNIE
AND SERVICED ALL ORIGINAL
STOCK NUMBER #ANNIE1000------1935 is the year this "lil orphan Annie"" was produced at the Ingraham factories in the USA, Bristol Connecticut
to be exact. This is a clean clean original dial and the case is chromed and
polished best I could get it and it really is clean. The movement as you know is
pin lever and they were never good time keepers but they run forever. I have
just cleaned this movement so no worries here at all. The case is 40mm long and
without the original large crown it is 22mm wide. If your a character watch buff
then you know they are really disappearing quickly and with clean dials? even
faster.
275.00 USD
|
|
SPACE RANGER
"ROCKY JONES" AND SERVICED
STOCK NUMBER #ROCKY1000------1955 is the year this Rocky Jones "Space
Ranger" was produced at the Ingraham factories in the USA, Bristol Connecticut
to be exact. This is a clean clean original dial and the case is chromed and
polished best I could get it and it really is clean. The movement as you know is
pin lever and they were never good time keepers but they run forever. I have
just cleaned this movement so no worries here at all. The case is 42mm long and
without the original large crown it is 28mm wide. If your a character watch buff
then you know they are really disappearing quickly and with clean dials? even
faster.
300.00 USD
|
|
LONE RANGER AND
EXTRA CLEAN AND SERVICED
STOCK NUMBER #LONE RANGER------Hi YO SILVER!!!!I have a great
blast form the past Lone Ranger manual wind wrist watch and the dial is indeed
original. This is a chromed case and it is 38mm long and without the original
crown it is 25mm wide. We call these movements pin levers and they were never
great time keepers but easy to make so anyone could afford a wrist watch. The
era for this piece is the id 1940's and the band is a period piece and 16mm in
width never worn. The crystal is even original and I buffed it to perfection. So
SADDLE UP on this one! On a closing note the back s a steel snap in with no
personal engravings.
350.00 USD
|
|
ROY ROGERS
AMERICAN MADE WRIST WATCH AND VERY CLEAN
STOCK NUMBER #ROY ROGERS1000------Keep in mind pin lever watches never kept
good time but the character watch line are extremely desirable among collectors
and for nostalgia indeed. This is a chromed case genuine Roy Rogers character
wrist watch and the dial is original as well as the hands. Even on the bottom of
the dial it is written "made in USA". The case is 43mm long and without the
original crown it is 30mm wide. the era for this beauty is 1954 and you can see
it is really s true American cult piece. The band is leather and
compliments this Roy Rogers piece so here you go for a great Christmas gift to
give.
325.00 USD
|